ECE R26 PDF
Regulation No 26 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicles with. ECE R26 Regulation (03 Series, ) “The uniform regulations on vehicle chapter and section numbering betw een this standard and the ECE R ECE UNIFORM PROVISIONS CONCERNING THE APPROVAL OF: VEHICLES WITH REGARD TO THEIR EXTERNAL PROJECTIONS Incorporating.
|Published (Last):||19 November 2018|
|PDF File Size:||14.55 Mb|
|ePub File Size:||2.49 Mb|
|Price:||Free* [*Free Regsitration Required]|
The provisions of this Regulation shall not apply to those parts of the external surface which, with the vehicle in the laden condition, with all doors, windows and access lids etc. Cee approval mark shall be clearly legible and be indelible. Uniform provisions concerning the approval of direction indicators for power-driven vehicles and their trailers UNECE R6 establishes technical and administrative criteria for the approval of driver-operated devices that signal a driver’s intention to change the direction in which his or her vehicle is proceeding.
Date of report ecd by that service: Rim contour shall conform to the International Standard specified by the wheel manufacturer.
It shall be expressed according to the prescription of one International Tyre and Rim Standards and includes at least:. Where two or more points of contact occur simultaneously, the lower point of contact shall be used to cee the floor line.
Licenses and Certificates
The name was changed after WP. UN R64 Spare Tires Temporary-use Tires “Uniform provisions concerning the approval of vehicles with regard to their equipment which may include: Uniform provisions concerning the approval of motor vehicles and their components with regard to the safety- related performance of hydrogen-fuelled vehicles UN Regulation version of the HFCV Global Technical Regulation. Dce for each impact position One for each impact position.
Min cycles with 75 per cent M bmax. These projections shall in any case satisfy the provisions of paragraph 5. UN R Vehicle Recyclability Light Vehicle Recyclability Uniform provisions concerning the approval of motor vehicles with regard to their reusability, recyclability and recoverability Beginning in the ‘s, a number of nations began introducing legislation to regulate the treatment of end-of-life vehicles.
UN R39 Speedometer Equipment. The Contracting Parties to the Agreement applying the regulation shall communicate to the United Nations secretariat the names dce addresses of the Technical Services responsible for conducting approval tests and of the administrative departments which grant approval and to which forms certifying approval or extension or refusal or withdrawal of approval, or production definitely discontinued issued in other countries, are to be sent.
Uniform provisions concerning the approval of passenger cars with regard to electronic stability control systems This regulation was established through the extraction of ESC provisions from UN Regulation H. Tyres Tyres taken from normal series production with the minimum nominal section width and minimum rolling circumference on the range of tyres recommended for the particular wheel. Windows which move outwards from the external surface of the vehicle shall comply with the following provisions in all positions of use: The surface treated sample shall pass a salt-spray test, in which the sample and any components with which is normally in contact are put in upright position into the salt-spray test equipment.
Vehicles equipped with hydropneumatic, hydraulic or pneumatic suspension or a device for automatic levelling according to load shall be tested with the vehicle in the most adverse normal running condition specified by the manufacturer. Check of the following mechanical characteristics R p0,2R mand A ecw to the materials:. Would you like to keep them?
Uniform provisions concerning the approval of retro-reflecting devices for power-driven r266 and their trailers This regulation will be superseded by a new UN Regulation on Retro-Reflecting Devices RRD under the Simplification of Lighting Regulations development program.
EU case law Case law Digital reports Directory of case law. Corrigenda are used to correct editorial errors. The regulations are also designed for use within the international approval system.
Aimed particularly at reducing injuries to the elderly, the test sets a 42 mm ThCC threshold that will be strengthened to 34 mm for the HIII 5F in via the 01 series amendments.
In other words, UN R0 does not prescribe technical provisions for the evaluation of performance as much as it describes how approvals under UN Regulations may be consolidated into a single approval.
Certificates and licenses
Any special wheel fixing components shall allow fitting of the pattern part replacement wheel without requiring any additional change. The Type Approval Authority which has granted type approval may at any time verify the conformity control methods applicable to each production unit.
UN R27 Warning Triangles Advance Wce Triangles Uniform Provisions Concerning the Approval of Advance-Warning Triangles This Regulation applies to certain advance-warning devices intended to be on board vehicles and to be placed on the carriageway in order to signal, by day and at night, the presence of a halted vehicle. When the quality level appears unsatisfactory or when it seems necessary to verify the validity of the tests carried out in the application of paragraph 8.
Translation of “Regulation ECE-R26” in Spanish
Where original gauge length L o: UN R35 Foot Controls. Transitional provisions ANNEXES Annex 1 — Communication concerning the approval or refusal or extension or withdrawal of approval or production definitely discontinued of a vehicle type with regard to its external projections Annex 2 — Arrangements of the approval marks Annex 3 — Methods of determining the dimensions of projections and gaps Annex 4 — Communication concerning the approval or refusal or extension or withdrawal of approval or production definitely discontinued of a separate technical unit type of luggage rack, ski rack or radio receiving or transmitting aerial 1.
Use new wheels each time. Lateral deflectors shall have a radius of curvature of at least 1mm on edges capable of being directed outwards.
The hardness measurement shall be taken with the component as installed on the vehicle. Help Print this page. Application for type approval with regard to luggage racks, ski racks or radio receiving or transmitting aerials considered to be separate technical units. As from the official date of entry into force of the 02 series of amendments, no Contracting Party applying this Regulation shall refuse to grant ECE approvals under this Regulation as amended by the 02 series of amendments.
InterRegs: Regulation No. | ECE – United Nations
Wheel fixing The use of vehicle manufacturer’s replacement wheel fixing components is recommended. The application for approval of a wheel type shall be submitted by the manufacturer, or by his duly accredited representative, and shall be accompanied by:. However, if the distance between two consecutive elements is equal to or less than 25mm, the radii of curvature of external faces of the elements shall not be less than 0.
Handles, hinges and push-buttons of doors, luggage compartments and bonnets; fuel tank filler caps and covers 6. UN R7 Position, stop and end-outline lamps.
Two wheels shall be tested. UN R43 Safety Glazing. Uniform provisions concerning the approval of emergency call devices and motor vehicles with regard to the installation of these devices. In determining the floor line, the jacking points, exhaust pipes or wheels shall not be taken into consideration. Jacking Brackets and Exhaust Pipes 6.